Bosch Kl 1208 Battery Charger Manual Exclusive [DIRECT]

If you swap the clamps, you will blow the fuse. Most KL 1208 models have a blade-style fuse on the front or back panel.

: Check the battery's fluid level. If lead plates are not covered by at least 5 mm of fluid, top up with distilled water. Connecting the Charger Verify the charger voltage matches the battery voltage. Connect the terminal (+) to the positive pole (+). Connect the terminal (—) to the negative pole (—). Powering On bosch kl 1208 battery charger manual exclusive

The (and similar models like the ML 1208E) is an automatic battery charger designed for 12V lead-acid batteries, such as those found in motor vehicles, boats, and lawnmowers. Charging Sequence If you swap the clamps, you will blow the fuse

: turn off the unit, unplug from the wall, and then remove the clamps. АРМО-Системы If lead plates are not covered by at